A pool with a deep end and a raised spa beam isn't a standard close - each structure has its own water-level rule, and getting one wrong can crack plaster or pop a beam. This guide gives exact target levels for both, explains why they differ, and walks through the right order to set them.
Winterizing an inground pool with a heater still plumbed in requires a few extra steps beyond standard closing. You need to drain the heater body, purge the heat exchanger ports, and protect any bypass lines from freezing. This guide walks through each step with specific guidance on what to drain, how to blow out the lines, and when antifreeze is your backup plan.
Adding the right amount of chlorine before covering your pool for winter prevents algae, staining, and a swamp opening in spring. This guide gives exact shock doses by pool size, explains which chlorine form to use, and walks through the closing sequence step by step.
A saltwater chlorinator's monthly running cost depends on your pool size, your electricity rate, and how hard your cell is working. This breakdown covers real numbers for pools from 10,000 to 40,000 gallons so you know exactly what to expect on your electric bill.
Wondering whether a variable-speed pump is actually worth the higher price tag for a 20,000-gallon inground pool? This post breaks down the real annual electricity cost of each pump type using worked numbers, so you can see exactly what the payback period looks like before you buy.
Converting an inground pool from chlorine to saltwater costs between $1,200 and $3,500 for most homeowners, depending on pool size and your existing equipment. This guide breaks down the real numbers by pool size, explains what drives the price up or down, and walks through what the conversion actually involves.
A cracked or leaking skimmer line can cost anywhere from $150 for a simple spot repair to $3,000 or more for a full replumb. This guide breaks down what drives the price, when a patch is enough, and when you need to pull the whole line.
Many pool owners wonder if they can convert their above-ground pool into an inground one, but the honest answer is that it's not a conversion at all - it's a full replacement. This guide breaks down what that actually costs, what drives the price, and how to decide if it's worth it.
Replacing a pool skimmer can run anywhere from $150 for a simple above-ground swap to $1,500 or more for an inground concrete pool. This breakdown covers parts, labor, pool type, and the common mistakes that drive costs up.
Replastering a pool in a cold climate costs more than the national average - and the reasons go beyond just labor rates. This guide breaks down what drives those extra costs, the narrow timing window contractors work within, and how to avoid the mistakes that lead to a failed plaster job.
